Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
< Solid Carbide Router Bits

Solid Carbide Router Bit - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"

£25.00
£0.00 £25.00
In Stock for delivery by
Order within
Specifically designed for cutting acrylic, these router bits have two polished flutes, for superior chip clearance, a consistent feed rate and a clean finish. Precision ground from solid micro-grain tungsten carbide, for the longest possible tool life and edge retention.
  • Shop with confidence with our 3 Year Warranty
  • Rated excellent by Trustpilot based on 30,081 reviews
  • Over 2.5 million Rutlands® premium woodworking tools sold worldwide
Solid Carbide Router Bit - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
£25.00
£0.00 £25.00
Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
KEY FEATURES
  • 3 Year Warranty
  • Straight two flute acrylic router bit, specifically designed for cutting acrylic
  • Two polished flutes aid with chip clearance, for a consistent feed rate and clean finish
  • Precision ground, micro-grain solid tungsten carbide provides exceptional tool life
  • Solid carbide bits run cooler during use, retaining a sharper edge for longer
  • Superior edge retention ensures cleaner and more accurate cuts, for the ultimate finish
FULL DESCRIPTION
Solid Carbide Router Bits
Each router bit has been precision ground from a single piece of super micro-grain solid tungsten carbide. This ultimate micro-grain carbide formulation gives the longest tool life and edge retention ensuring a very clean and accurate cut that leads to the ultimate finish.

Straight Two Flute Acrylic
Straight two flute acrylic router bits are specifically designed for cutting acrylic. The bits have two polished flutes which aid with chip clearance, give a consistent feed rate and leave a clean finish.

Superior Finish and Performance
Each bit has been specifically designed to give the optimum cutting angle to ensure the wood is sheared cleanly. This leads to the bits running cooler during use as solid carbide dissipates heat more uniformly, even at high speeds, meaning the edges remain as sharp as possible and are retained for longer. Each bit conforms to strict German DIN standards to ensure maximum operator safety. ©
SPECIFICATIONS
  • BrandRutlands®
  • Product CodeR5889
  • D6.35mm
  • H19mm
  • L63.5mm
  • n.max24,000
  • S1/4"
SHIPPING & PAYMENT

UK Shipping
UK orders placed before 4pm will be delivered the next working day with shipping costing £7. Visit our Shipping page.

Outside of UK Shipping
We ship worldwide to over 200 countries. The total amount you pay includes all applicable customs duties & taxes. We guarantee no additional charges on delivery. Shipping cost and delivery time shown at checkout. Visit our Shipping page.

Click & Collect
Simply select Pick up on the checkout, and we will email you when you order is ready for collection at our distribution centre in Bakewell. Visit our Click & Collect page.

Payment
We accept all major credit cards and mobile payment methods. Visit our Payment page.

Returns
We will happily accept returns within 30 days. For more information about returns, visit our Returns page.
REVIEWS

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Martin B.
Well packaged & presented

Well packaged & presented, and most importantly, with me the next day. As for the results, I'm very pleased so far & have managed to find profiles not offered by other suppliers. Will no doubt be back for more.

D
Dave T.
Thoroughly impressed

Cheap bits tend to tear the wood & blunt quickly. These on the other hand have kept an ultra sharp edge & given me a beautifully clean cut - no burn marks & very little sanding required, if any at all. Thoroughly impressed.

J
James H.
Rutlands - my go to place for router bits

Tried many brands over the years, but happy to say I now won't go anywhere else for router bits. I've thrown everything at them, including the hardest walnut and ash, and they continue to impress with the quality of finish left behind. If you're serious about routing then investing in quality bits is a must.
Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"

Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"

Solid Carbide - Straight Acrylic 2 Flute - D=6.35mm H=19mm L=63.5mm S=1/4"

YOU MAY ALSO LIKE

Solid Carbide - Spiral Compression Top & Bottom Bearing - D=19mm H1=16mm H2=16mm S=1/2" Solid Carbide - Spiral Compression Top & Bottom Bearing - D=19mm H1=16mm H2=16mm S=1/2"

Solid Carbide Router Bit - Spiral Compression Top & Bottom Bearing - D=19mm H1=16mm H2=16mm S=1/2"
£120.00
Solid Carbide - Spiral Compression Top & Bottom Bearing - D=12.7mm H1=16mm H2=9.5mm S=1/4" Solid Carbide - Spiral Compression Top & Bottom Bearing - D=12.7mm H1=16mm H2=9.5mm S=1/4"

Solid Carbide Router Bit - Spiral Compression Top & Bottom Bearing - D=12.7mm H1=16mm H2=9.5mm S=1/4"
£80.00
Solid Carbide - Spiral Compression Bottom Bearing - D=19mm H1=16mm H2=16mm L=78mm S=1/2" Solid Carbide - Spiral Compression Bottom Bearing - D=19mm H1=16mm H2=16mm L=78mm S=1/2"

LOW STOCK

Solid Carbide Router Bit - Spiral Compression Bottom Bearing - D=19mm H1=16mm H2=16mm L=78mm S=1/2"
£110.00
Solid Carbide - Spiral Compression Bottom Bearing - D=12.7mm H1=16mm H2=9.5mm L=71mm S=1/4" Solid Carbide - Spiral Compression Bottom Bearing - D=12.7mm H1=16mm H2=9.5mm L=71mm S=1/4"

Solid Carbide Router Bit - Spiral Compression Bottom Bearing - D=12.7mm H1=16mm H2=9.5mm L=71mm S=1/4"
£70.00
Solid Carbide - Spiral Compression Top Bearing - D=19mm H1=16mm H2=16mm L=92mm S=1/2" Solid Carbide - Spiral Compression Top Bearing - D=19mm H1=16mm H2=16mm L=92mm S=1/2"

Solid Carbide Router Bit - Spiral Compression Top Bearing - D=19mm H1=16mm H2=16mm L=92mm S=1/2"
£115.00
Solid Carbide - Spiral Compression Top Bearing - D=12.7mm H1=16mm H2=9.5mm L=71mm S=1/4" Solid Carbide - Spiral Compression Top Bearing - D=12.7mm H1=16mm H2=9.5mm L=71mm S=1/4"

Solid Carbide Router Bit - Spiral Compression Top Bearing - D=12.7mm H1=16mm H2=9.5mm L=71mm S=1/4"
£70.00
Solid Carbide - Spiral Compression 2 Flute with 2 Bearings Solid Carbide - Spiral Compression 2 Flute with 2 Bearings

Solid Carbide Router Bit - Spiral Compression 2 Flute with 2 Bearings
From £70.00
More options
Solid Carbide - Spiral Compression 3 Flute - D=12mm H1=47mm H2=5mm L=102mm S=1/2" Solid Carbide - Spiral Compression 3 Flute - D=12mm H1=47mm H2=5mm L=102mm S=1/2"

Solid Carbide Router Bit - Spiral Compression 3 Flute - D=12mm H1=47mm H2=5mm L=102mm S=1/2"
£100.00
Solid Carbide - Spiral Compression 2 Flute Solid Carbide - Spiral Compression 2 Flute

Solid Carbide Router Bit - Spiral Compression 2 Flute
From £18.00
More options
Solid Carbide Router Bit - Spiral Compression 1 Flute Solid Carbide Router Bit - Spiral Compression 1 Flute

Solid Carbide Router Bit - Spiral Compression 1 Flute
From £20.00
More options
Solid Carbide - Spiral Up Cut 2 Flute with Top Bearing - D=12.7mm H=25mm L=72mm S=1/4" Solid Carbide - Spiral Up Cut 2 Flute with Top Bearing - D=12.7mm H=25mm L=72mm S=1/4"

Solid Carbide Router Bit - Spiral Up Cut 2 Flute with Top Bearing - D=12.7mm H=25mm L=72mm S=1/4"
£70.00
Solid Carbide - Spiral Up Cut 2 Flute with 2 Bearings Solid Carbide - Spiral Up Cut 2 Flute with 2 Bearings

Solid Carbide Router Bit - Spiral Up Cut 2 Flute with 2 Bearings
From £50.00
More options
Solid Carbide Router Bit - Spiral Up Cut 3 Flute Solid Carbide Router Bit - Spiral Up Cut 3 Flute

Solid Carbide Router Bit - Spiral Up Cut 3 Flute
From £40.00
More options
Solid Carbide - Spiral Up Cut 2 Flute Solid Carbide - Spiral Up Cut 2 Flute

Solid Carbide Router Bit - Spiral Up Cut 2 Flute
From £14.00
More options
Solid Carbide Router Bit - Spiral Up Cut 1 Flute Solid Carbide Router Bit - Spiral Up Cut 1 Flute

Solid Carbide Router Bit - Spiral Up Cut 1 Flute
From £15.00
More options
Solid Carbide Router Bit - Spiral Chipbreaker Up Cut 3 Flute Solid Carbide Router Bit - Spiral Chipbreaker Up Cut 3 Flute

Solid Carbide Router Bit - Spiral Chipbreaker Up Cut 3 Flute
From £50.00
More options
Solid Carbide - Spiral Chipbreaker Up Cut 2 Flute Solid Carbide - Spiral Chipbreaker Up Cut 2 Flute

Solid Carbide Router Bit - Spiral Chipbreaker Up Cut 2 Flute
From £60.00
More options
Solid Carbide - Spiral Ball End Up Cut 2 Flute Solid Carbide - Spiral Ball End Up Cut 2 Flute

Solid Carbide Router Bit - Spiral Ball End Up Cut 2 Flute
From £20.00
More options
Solid Carbide - Spiral Down Cut 2 Flute with 2 Bearings Solid Carbide - Spiral Down Cut 2 Flute with 2 Bearings

Solid Carbide Router Bit - Spiral Down Cut 2 Flute with 2 Bearings
From £50.00
More options
Solid Carbide - Spiral Down Cut 2 Flute with Bottom Bearing - D=12.7mm H=25mm L=72mm S=1/4" Solid Carbide - Spiral Down Cut 2 Flute with Bottom Bearing - D=12.7mm H=25mm L=72mm S=1/4"

Solid Carbide Router Bit - Spiral Down Cut 2 Flute with Bottom Bearing - D=12.7mm H=25mm L=72mm S=1/4"
£70.00
Solid Carbide Router Bit - Spiral Down Cut 3 Flute Solid Carbide Router Bit - Spiral Down Cut 3 Flute

LOW STOCK

Solid Carbide Router Bit - Spiral Down Cut 3 Flute
From £40.00
More options
Solid Carbide - Spiral Down Cut 2 Flute Solid Carbide - Spiral Down Cut 2 Flute

Solid Carbide Router Bit - Spiral Down Cut 2 Flute
From £14.00
More options
Solid Carbide Router Bit - Spiral Down Cut 1 Flute Solid Carbide Router Bit - Spiral Down Cut 1 Flute

Solid Carbide Router Bit - Spiral Down Cut 1 Flute
From £15.00
More options
Solid Carbide Router Bit - Spiral Chipbreaker Down Cut 3 Flute Solid Carbide Router Bit - Spiral Chipbreaker Down Cut 3 Flute

Solid Carbide Router Bit - Spiral Chipbreaker Down Cut 3 Flute
From £50.00
More options
Solid Carbide - Spiral Chipbreaker Down Cut 2 Flute Solid Carbide - Spiral Chipbreaker Down Cut 2 Flute

Solid Carbide Router Bit - Spiral Chipbreaker Down Cut 2 Flute
From £60.00
More options
Solid Carbide - Engraver 3 Flute - D=15mm H=13mm A=30° L=62mm S=1/4" Solid Carbide - Engraver 3 Flute - D=15mm H=13mm A=30° L=62mm S=1/4"

Solid Carbide Router Bit - Engraver 3 Flute - D=15mm H=13mm A=30° L=62mm S=1/4"
£50.00
Solid Carbide - Engraver - D=6.35mm Tip= 0.5mm H=11mm A=30° L=51mm S=1/4" Solid Carbide - Engraver - D=6.35mm Tip= 0.5mm H=11mm A=30° L=51mm S=1/4"

Solid Carbide Router Bit - Engraver - D=6.35mm Tip= 0.5mm H=11mm A=30° L=51mm S=1/4"
£40.00
Solid Carbide - Spiral 2 Flute Conical Ball Nose Solid Carbide - Spiral 2 Flute Conical Ball Nose

Solid Carbide Router Bit - Spiral 2 Flute Conical Ball Nose
From £40.00
More options
Solid Carbide - Flush Trim - D=6.3mm H=6.3mm L=40mm S=1/4" Solid Carbide - Flush Trim - D=6.3mm H=6.3mm L=40mm S=1/4"

Solid Carbide Router Bit - Flush Trim - D=6.3mm H=6.3mm L=40mm S=1/4"
£19.00
Solid Carbide - Low Profile Flush Trim - D=6.35mm H=6.35mm L=35mm S=1/4" Solid Carbide - Low Profile Flush Trim - D=6.35mm H=6.35mm L=35mm S=1/4"

Solid Carbide Router Bit - Low Profile Flush Trim - D=6.35mm H=6.35mm L=35mm S=1/4"
£19.00
Solid Carbide - Spiral Up Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4" Solid Carbide - Spiral Up Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4"

Solid Carbide Router Bit - Spiral Up Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
£30.00
Solid Carbide - Spiral Down Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4" Solid Carbide - Spiral Down Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4"

Solid Carbide Router Bit - Spiral Down Cut O Flute - D=6.35mm H=19mm L=63.5mm S=1/4"
£30.00
Solid Carbide - Spiral Up Cut Acrylic - D=6.35mm H=19mm L=63mm S=1/4" Solid Carbide - Spiral Up Cut Acrylic - D=6.35mm H=19mm L=63mm S=1/4"

Solid Carbide Router Bit - Spiral Up Cut Acrylic - D=6.35mm H=19mm L=63mm S=1/4"
£30.00
Solid Carbide - Spiral Down Cut Acrylic - D=6.35mm H=19mm L=63mm S=1/4" Solid Carbide - Spiral Down Cut Acrylic - D=6.35mm H=19mm L=63mm S=1/4"

Solid Carbide Router Bit - Spiral Down Cut Acrylic - D=6.35mm H=19mm L=63mm S=1/4"
£30.00